15"
Differential Drive® low-frequency driver with dual neodymium
magnet for light weight and reduced distortion.
1"
(throat diameter) JBL compression driver with 1.75" titanium
diaphragm and ferro-fluid cooling.
300 watts
low-frequency and 100 watts high-frequency (bi-amplified) -
actual power delivered to the drivers.
Built in
3-input mixer. One balanced mic/line input, two 1/4" phone
line-level inputs.
Two-band
equalization.
Balanced
loop-through/mix output. “Daisychain” additional EON speakers or
send the mixed output to a mixing console.
60° x 90°
(nominal) constant directivity horn.
Thermomaster® Total Thermal Management System®. A single piece,
cast-aluminum baffle integrates the woofer frame, horn, and
amplifier heat sink. Air movement in the finned ports dissipates
heat - no internal or external cooling fans are required.
Rugged,
light-weight, black co-polymer enclosure.
Integral
35 mm pole mount receptacle.
Multi-angle enclosure for front of house or stage monitor
application.
Tailored
dynamic processing protects amplifiers and speakers from being
over-driven without producing extreme changes in frequency
response as level varies.
Extended
low-frequency performance. Delivers powerful bass down to 39 Hz.
The flagship
of the new series is the JBL EON15 G2, delivering 300 watts of power
to a 15" neodymium Differential Drive® LF driver. The driver boasts
a dual neodymium magnet and dual voice coil motor that efficiently
delivers high output from a lightweight woofer. Meanwhile, the HF
amplifier delivers 100 watts of power to a 1.75" titanium diaphragm
compression driver with Ferro-fluid cooling.
With more than
300,000 systems already being used in applications from live sound
reinforcement, speech and vocals to music playback in entertainment,
A/V and institutional environments, the JBL EON system is firmly
entrenched as the industry leader in powered portable speaker
systems.